虚实结合的可穿戴产品适合性检验研究

目的 为了更科学地研究和检验可穿戴产品的适合性,提出一种适合性检验方法,能够精确保留现实环境中的产品佩戴关系,并能将现实与虚拟的适合性检验研究相结合,得到合理的适合性检验结果.方法 以虚拟现实眼镜的适合性检验为例,通过高精度的三维测量技术将现实环境中的人、产品以及人—产品佩戴关系转化为三维虚拟信息,并以人—产品佩戴三维模型为参考基准对齐人和产品的虚拟模型,得到保留现实佩戴关系的人—产品佩戴模型组,再应用偏差分析法得出人—机佩戴区域的可视化适合性结果和统计数据,结合主观评价方法进一步分析产品的适合性.结论 虚实结合的产品适合性检验方法可在虚拟环境中高精度地保留现实环境中的人—产品佩戴关系,并能得到可视化的适合性检验结果,为检验和指导产品的适合性提供依据.     

HPLC法测定伐地昔布的有关物质

建立高效液相色谱法检测伐地昔布的有关物质.采用α-酸性糖蛋白键合硅胶的手性色谱柱,以乙腈-醋酸铵缓冲液(0.01 mol/L,pH4.0)作为流动相进行梯度洗脱,检测波长215 nm.伐地昔布与5个已知杂质均可达到基线分离,在各自浓度范围内线性关系良好,平均回收率95.13％～99.77％,RSD1.10％～1.77％,检测限0.017 9～0.060 1 μg/mL,定量限0.059 7～0.200 0 μg/mL.方法专属性强,准确度好,灵敏度高,可为伐地昔布的质量控制及后续分离提纯和帕瑞昔布的质量控制提供指导.     

多孔SiO2分子巢制备多功能涤纶纤维试验研究

针对传统PET材料不具备抗菌、不耐洗等问题,以煎煮法为基础,以草珊瑚、艾叶和薄荷为原料,制备含植物活性成分的溶液,其具有抗菌、杀菌的作用;以溶胶-凝胶法为多孔材料制备方法,用十六烷基三甲基溴化铵、十二烷基苯磺酸钠表面活性剂为模板剂,正硅酸乙酯为有机硅源,氨水为催化剂,乙醇和乙醚为助溶剂,在水-乙醇-乙醚体系中合成多孔二氧化硅微球;然后,多孔二氧化硅微球与提取液混合制备含植物活性成分的多孔二氧化硅分子巢;最后以制备的多孔二氧化硅分子巢与普通的聚酯切片用熔融纺丝工艺进行造粒、纺丝,得到具有抗菌、杀菌和耐洗的多功能涤纶纤维.通过SEM微观观察和力学性能测试、抗菌试验、耐洗性测试,对上述制备的多功能涤纶纤维性能进行验证.结果表明:在模板剂总浓度为0.029 mol·L-1、V醇:V醚=20:20、两种表面活性剂比为4:1时,得到的多孔SiO2微球排列规整;当多孔二氧化硅分子巢掺量(质量分数)在0.5％～1％时,通过熔融共混纺丝得到的新型多功能涤纶纤维力学性能表现最优;当多孔二氧化硅分子巢掺量(质量分数)在1％时,得到的新型多功能涤纶纤维的抗菌性能达到87.9％.而二氧化硅分子巢掺量越高,纤维材料越耐洗.以上结果说明本试验制备涤纶纤维的方案可行.     

澜沧江流域不同茶区晒青茶品质比较

为深入了解云南澜沧江流域不同茶区晒青茶的品质差异，选取比较澜沧、双江2个茶区的24个乡镇晒青茶样，采用感官审评与品质理化成分检测，分析不同茶区晒青茶主要理化成分和感官品质方面存在的差异。结果表明：澜沧、双江2个茶区晒青茶的茶多酚平均值分别为24.43%、23.18%；游离氨基酸平均值分别为2.72%、3.97%；咖啡碱平均值分别为4.90%、4.48%；水浸出物平均值分别为45.67%、44.29%；酚氨比均值分别为9.40、6.07。澜沧、双江2个茶区不同产地的晒青茶茶多酚、游离氨基酸、咖啡碱、水浸出物和酚氨比之间存在一定差异。不同的内含化学成分，使各茶区的晒青茶感官品质明显不同。澜沧茶区的晒青茶滋味整体较醇和、稍涩，部分稍带花香与焦味；双江茶区的晒青茶整体滋味较浓醇、微涩带苦，部分平和。     

空间曲线的特征识别与高质量非均匀采样

为避免传统均匀采样方法因忽视曲线重要特征而生成不理想的采样结果,获得给定数量且由特征点和辅助点组成的采样点序列,提出基于特征识别的高质量空间曲线非均匀采样方法.首先使用抛物线插值法得到曲线上所有曲率极大值点和挠率极大值点的近似位置,经筛选后产生特征点,以更好地抓住空间曲线的轮廓特征.然后定义基于弧长、曲率和挠率加权组合的特征函数,并以此自适应地选取曲线上的辅助点.与3种主流采样方法比较的实验结果表明,该方法能够获得更高质量的采样结果且具有更好的实用性,从而进一步改善空间曲线的B样条拟合效果.     

Effects of multiple freeze–thaw cycles on meat quality,nutrients, water distribution and microstructure in bovine rumen smooth muscle

This study investigated the effect of 5 freeze–thaw cycles (freezing at −18°C for 12 h and then thawing at 4°C for approximately 12 h) on the meat quality, proximate composition, water distribution and microstructure of bovine rumen smooth muscle (BSM). As the number of freeze–thaw cycles increased, BSM pH, shear force, water content and protein content decreased by 3.06%, 35.50%, 14.49% and 21.11%, respectively, whereas BSM thawing loss, cooking loss, pressing loss, total aerobic count (TAC), ash content and fat content increased by 108.12%, 47.75%, 78.33%, 90.99%, 105% and 35.20%, respectively. The freeze–thaw cycles resulted in greater protein and lipid oxidation, as evidenced by a 36.46% reduction in the sulfhydryl content and a 209.06% and 338.46% increase in the carbonyl and malondialdehyde contents, respectively. Ice crystal formation disrupted the structural integrity of the muscle tissue. Low-field nuclear magnetic resonance results showed that the freeze–thaw cycles prolonged the relaxation times (T_2b, T₂₁ and T₂₂), indicating that immobile water shifted to free water, and consequently, free water mobility increased. After 3 freeze–thaw cycles, the decline in shear force slowed, the increase in thawing loss became accelerated, and the TAC approached the domain value (6 log colony-forming units/g). Therefore, the number of freeze–thaw cycles of smooth muscle during transport, storage and distribution should be controlled to 3 or fewer. The current results provide a theoretical basis and data support for the further utilisation and culinary processing of smooth muscle.     

CDBN‑IKELM的轴承变工况故障诊断方法

针对现有方法在轴承变工况方面存在的诊断精度低、人工提取特征不充分等问题，提出了基于卷积深度置信网络（convolutional deep belief network，简称CDBN）与改进核极限学习机 （improved Kernel?based extreme learning machine，简称IKELM）的滚动轴承故障智能识别方法。首先，由卷积深度置信网络对原始信号内的故障特征进行深层自适应提取；其次，利用等距特征映射对提取的多维特征进行降维，去除冗余特征信息；然后，采用改进的核极限学习机对特征进行分类，使用粒子群（particle swarm optimization， 简称PSO）对模型重要参数进行优化，实现滚动轴承变工况下的故障识别；最后，将所提方法应用于不同工况下多种轴承故障的诊断。实验结果表明，该方法能够智能有效地识别变工况的轴承故障，诊断结果优于已有的智能故障诊断方法。     

Changes in polyphenol fractions and bacterial composition after in vitrofermentation of apple peel polyphenol by gut microbiota

The changes in polyphenol fractions after in vitro fermentation of apple peel polyphenol (APP) by gut microbiota as well as the effects of APP on the growth, pH value, short-chain fatty acids (SCFAs) production and intestinal flora composition of gut microbiota fermentation were firstly explored in this study. The relative abundance of Lactobacillus in the APP group was 49.55% with an increment of 49.40% compared with the blank group, while that of Bifidobacterium was 13.32%. Moreover, the flora produced 37.093 ± 0.478 mM of SCFAs including acetic acid, propionic acid, butyric acid and valeric acid during the process of fermentation, thus reduced the environmental pH value. In addition, polyphenol fractions in APP were altered by gut microbiota fermentation to some extent, for example, glycosides were hydrolysed to aglycones. These findings suggested APP as a potential prebiotic agent to alleviate the disorder of intestinal flora.     

Acid–base transport model depicting the dynamic pH response of interfacial reactions

Acid–base transport is integral to many important interfacial reactions in various fields of chemistry, but its theoretical foundation is lacked. Herein, a common acid–base transport model is established owing to the success in deriving buffer transport equations. This model is applicable to most buffer systems by flexibly integrating the transport equations in terms of buffer components, and is verified through the model relationships of buffer transport limiting current by using hydrogen evolution reaction experiments. Based on model calculations, two diagram approaches are proposed to depict the dynamic pH response and aid buffer operation optimizations. The model and methods allow us to quantify the rate-limiting effect of acid–base transport on interfacial reactions and to precisely control the effect through medium regulations. Furthermore, the model has laid the foundation of dynamic pH effect on species transformation and process mechanism, which can be of wide interest in the chemistry encompassing interfacial reactions.     

GM-CSF及CBS在肝损伤中的研究进展

肝损伤(liver injury)是指基因遗传或外部原因诱发的肝脏功能异常性疾病.临床表现为食欲不振、乏力、恶心、黄疸、疲乏等,严重者将出现肝功能衰竭,致死风险极高.在交通肇事、暴力犯罪及意外事件中,肝由于体积大、位置固定、质地脆弱、血运丰富等原因,往往是最容易发生损伤的器官之一,肝损伤后的死亡率可高达10.5％～25％[1].随着时间的变化,肝损伤的程度、病理改变、GM-CSF等相关细胞因子及CBS等相关酶的表达水平也会进一步变化.肝损伤后,由于肝内部环境稳态的破坏,器官的状态、结构、各种蛋白的转录水平、蛋白及细胞因子的表达变化水平也会发生一定程度的改变.因此定性定量地分析这些变化,找到时间相关性强的特异性指标,对于指导法医学的实践具有重要的作用.因此在法医学鉴定中,通过肝脏损伤及病变程度的改变,明确肝损伤病变与死亡时间的关系有利于判断事件或案件性质,并有助于进一步对责任方的认定.